飞机液压系统柱塞泵热分析

随着飞机液压系统向高压化、大功率化方向发展，液压系统的发热及温升问题受到了广泛关注。柱塞泵作为液压系统中重要的能量转换装置，对液压系统的功率损失和温度有重大的影响，良好的柱塞泵的热分析对液压系统的热设计和温度控制有重要的意义。然而传统的柱塞泵热分析方法，如平均油温法、软件仿真法和热节点网络法，因不够准确、高效和简洁而不能满足现代飞机液压系统热分析和热设计的相关需求。本文针对飞机液压系统柱塞泵发热的相关问题，采用基于集总参数的热网络分析方法，建立了柱塞泵热网络模型，通过对柱塞泵不同工况下的仿真，验证了模型的有效性和准确性，为柱塞泵及液压系统的热分析提供了参考。     

Optimization of bits allocation and path planning with trajectory constraint in UAV-enabled mobile edge computing system

In this paper, an Unmanned Aerial Vehicle (UAV) enabled Mobile Edge Computing (MEC) system is studied, in which UAV acts as server to offer computing offloading service to the Mobile Users (MUs) with limited computing capability and energy budget. We aim to minimize the total energy consumption of MUs by jointly optimizing the bit allocation for uplink, computing at the UAV and downlink, along with the UAV trajectory in a unified framework. To this end, a trajectory constraint model is employed to avoid sudden changes of velocity and acceleration during flying. Due to high-order information in use, we lead to a more reasonable nonconvex optimization problem than prior arts. An Alternating Direction Method of Multipliers (ADMM) method is introduced to solve the optimization problem, which is decomposed into a set of easy sub-problems, to meet the requirement on the efficiency in edge computing. Numerical results demonstrate that our approach leads a smoother UAV trajectory, significantly save the energy consumption for UAV during flying.     

ORB-SLAM系统优化框架分析概述

首先阐述了ORB-SLAM系统的核心思想和基本框架,介绍了SLAM系统中光束平差法的应用实现,然后针对视觉里程计部分不同的关键帧位姿优化过程分别进行了详细阐述,并利用KITTI数据集的不同序列的实验结果进行比较研究,给出了核心的光束平差法在ORB-SLAM中的具体工作方式及性能分析,最后讨论和分析了ORB-SLAM的优势和不足。     

功率级无刷直流电动机四象限运行模拟器设计

针对无刷直流电动机（BLDCM）驱动控制器在研发过程中全工况测试困难、测试成本高和研发周期长的问题，提出了一种采用分区间采样和解算方法的、具有四象限运行能力的功率级（PHIL）无刷直流电动机模拟器，替代实物电动机和机械负载装置完成对两两导通控制方式下无刷直流电动机驱动控制器的各项性能测试与可靠性试验。该模拟器由实时仿真器、电动机模拟变换器和多级式双向变换器3部分组成，实时仿真器负责采集被测电动机驱动控制器输出的PWM电压，实时解算电动机模型得到三相电流指令，控制电动机模拟变换器生成三相电流，多级式双向变换器负责维持模拟器输入、输出间的能量平衡关系，从而实现对四象限运行时无刷直流电动机的功率级模拟。实验结果表明:所提出的功率级无刷直流电动机模拟器模拟精度高、实时性好、测试灵活，能够有效替代实物电动机和机械负载装置，满足电动机驱动控制器的测试需求。      

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题，提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先，将飞行器模型化为严反馈形式，以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅，并保证限幅信号的可导性，限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰，设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明，本文方法能够在满足攻角约束基础上保证良好跟踪性能。     

基于AFI混合聚类算法的轴承故障诊断方法

针对滚动轴承振动信号标记数据量小、故障模式多样的现状，提出了一种基于AFI混合聚类算法的半监督式轴承振动信号故障诊断方法。利用小波包分解方法提取了信号的能量特征谱，并通过主成分分析方法增强了信号的特征；参考迭代自组织数据分析的“分裂”和“合并”的思想，为人工鱼群算法中的个体鱼增加了“分裂进化”和“合并进化”行为；采用模糊C均值方法定义了隶属度矩阵和目标函数，并利用改进的人工鱼群算法，迭代搜寻了目标函数的全局最优解，得到了各故障模式的聚类中心；通过计算测试数据的最近邻聚类中心，实现了故障模式识别。结果表明，该方法无需指定聚类簇数，能在标记数据量小的情况下完成训练，较同类方法表现出了更优的故障模式识别性能。     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

增广误差模型算法在目标跟踪中的应用

针对目标机动运行过程中,滤波模型与机动状态模型失配的问题,提出了一种新的增广状态误差滤波模型。不同于现有增广方案,该模型从模型失配所致状态滤波误差的角度出发,将状态估计误差增广为一状态量,通过滤波估计后用其校正原状态量。算法分析表明,该增广滤波模型具有自适应调节多重渐消因子的等效特性,增强了对目标的跟踪能力。基于该增广状态误差滤波模型,给出了滤波算法设计并进行了仿真实验。实验结果表明,基于该模型的滤波算法在对机动目标进行跟踪时具有更强的鲁棒性。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

三维攻击角度约束部分制导控制一体化设计

针对侧滑转弯(STT)导弹带有攻击角度约束的机动目标拦截问题，提出一种基于自适应终端滑模动态面控制的三维部分制导控制一体化(PIGC)设计方法。首先，建立了针对机动目标拦截的侧滑转弯导弹三维部分制导控制一体化设计模型，且不需要导弹速度微分体轴系分量信息。然后，使用终端滑模控制理论构建误差向量与虚拟控制量，达成精确拦截与攻击角度约束的控制目的；引入有限时间非线性收敛扩张状态观测器(ESO)来在线估计系统不确定性；设计自适应算子与自适应更新律对观测器的估计误差进行补偿，以提高方法的鲁棒性。最后，三维空间拦截仿真校验了方法在提高拦截精度与增强角度约束收敛性能的有效性。